Your Trusted Organoclay Manufacturer  & Supplier in China

Rheological Additive for

Paints,Coatings,Inks,Grease & Oil drilling Mud

Quick answer: In high-pressure, high-temperature (HPHT) drilling fluids, organophilic clay can contribute oil-phase viscosity, low-shear structure, and gel strength that support solids suspension. Its performance is formulation-specific: base-fluid chemistry, temperature exposure, shear history, emulsifier package, and the clay grade all matter. Qualification should use the actual invert-emulsion mud and representative HPHT conditioning, rather than a room-temperature clay dispersion alone.

What organophilic clay contributes in HPHT mud

Organophilic clay (organoclay or organobentonite) is used as a rheology modifier in oil-continuous fluids. Under suitable dispersion conditions, clay particles develop a reversible structure. This can raise low-shear viscosity and contribute to static gels, while shear during circulation changes the structure. In an invert emulsion drilling fluid, the additive works alongside emulsifiers, wetting agents, fluid-loss additives, weighting material, and other system components.

At elevated temperature, the measured response can shift as fluid viscosity, clay interactions, and the rest of the mud chemistry change. Pressure and temperature conditioning, dynamic shear, aging duration, and cooling history can also affect reported values. Do not infer downhole performance from a single ambient test or from the product name alone.

HPHT qualification: what to measure

  • Rheology at relevant conditions: Record plastic viscosity, yield point, low-shear readings, and gel strengths at the project’s specified temperatures, before and after aging.
  • Suspension and sag: Use the project’s selected static and dynamic sag evaluations with the intended weighting material and solids loading.
  • Emulsion integrity and filtration: Confirm electrical stability or other required emulsion indicators and HPHT fluid-loss behavior; organoclay does not replace these functions.
  • Repeatability: Document sample lot, mixing equipment, order of addition, shear energy, activation procedure, aging profile, and measurement temperature.

Run a controlled concentration ladder based on the supplier’s grade-specific guidance and the mud engineer’s design. Change one factor at a time, include a no-organoclay control where appropriate, and review the whole property balance. The selected level should meet the project’s rheology, suspension, filtration, and pumpability criteria together.

Choosing a grade and comparing market offerings

For a China-sourced organophilic clay, Camp-Shinning lists drilling-fluid grades including CP-2, CP-982, CP-250A, CP-992, and CP-EZ. Its product literature describes different dispersion and base-fluid fit by grade; for example, CP-250A is presented as an easy-dispersing self-activating option. Verify the latest TDS and written instructions for the specific HPHT fluid before testing. Published general drilling-fluid coverage is not an HPHT qualification guarantee.

Other suppliers also market organoclay or related clay rheology additives for drilling fluids. Zhejiang Hongyu’s HY-738 literature describes organic bentonite for low-to-medium polarity systems and lists drilling use. Sino-Holding/FCC publishes oil-drilling-fluid organoclay products; its V-GEL 4 is described as an organically modified palygorskite clay, a mineral route distinct from smectite organobentonite. These are examples to include in a neutral technical RFQ, not interchangeable grades or performance rankings. Ask each supplier for exact chemistry, target base-fluid range, HPHT test conditions, current batch documents, and sample support.

Practical HPHT screening workflow

  1. Define the base oil or synthetic fluid, oil/water ratio, salinity, emulsifier and wetting package, weighting material, solids, and operating temperature-pressure envelope.
  2. Obtain grade-specific addition and activation instructions. Do not add a separate activator unless the specific product guidance calls for it.
  3. Prepare repeatable lab batches using the same order of addition and mixing energy; test multiple organoclay levels only as a controlled screening exercise.
  4. Measure baseline rheology, condition and age samples to the test protocol, then repeat rheology and the required sag, filtration, and emulsion checks.
  5. Review results with the mud engineer and supplier before scaling up, and retain the accepted formula, batch data, and test procedure.

Frequently asked questions

Does a drilling grade automatically qualify for HPHT service?

No. General OBM or SBM applicability does not establish performance under a particular HPHT envelope. Require representative test data and qualify the complete fluid system.

Will increasing organoclay always improve high-temperature yield point?

No. A higher loading may alter low-shear rheology, gels, pumpability, or solids handling without solving a thermal or formulation issue. Diagnose the full system before adjustment.

Should an activator always be used?

No. Activation requirements are grade-specific. Follow the current product TDS and test procedure.

See our drilling-grade selection guide and oil-based mud overview. Contact our technical team to discuss your base fluid and HPHT test conditions.

Organobentonite Rheology Modifier in China


滚动至顶部

Ask A FREE QUOTE NOW