Vosak u prahu za matiranje

Matting Agents

Matting agents are used in achieving matte finishes in various applications. These agents encompass materials like silica, waxes, and fillers, which are blended into coatings and paints. When adding these matting agents, substrates can be endowed with a refined matte appearance. Waxes such as those derived from polyethylene, polypropylene, carnauba, amide, and polytetrafluoroethylene (PTFE) često se koriste kao dodaci za matiranje.

Svrha sredstva za matiranje je transformirati premaze i boje u medij koji daje prigušenu, završetak poput svile u različitim kategorijama, uključujući lakove za namještaj i drvo. Bilo da se radi o povećanju privlačnosti vintage komada ili uzdizanju suvremenog dizajna, uloga sredstva za matiranje je sastavna. Vrijedno je napomenuti da primjena sredstava za matiranje ne ugrožava inherentni kemijski sastav ili svojstva premaza.

Sredstva za matiranje, uključujući voskove svestrani su alati za postizanje mat završnih slojeva u raznim domenama, od lakova za namještaj do vodenih premaza. Their adeptness at reducing glossiness while preserving the underlying chemistry makes them indispensable for achieving desired aesthetics without compromising structural integrity.

What is Matting Effect?

The matting effect refers to a specific property exhibited by coatings that results in a smooth and understated appearance, characterized by minimal or no noticeable sheen. This effect is achieved through a deliberate alteration in the way light interacts with the coated surface. Unlike glossy finishes that reflect light uniformly and produce a shiny appearance, the matting effect reduces glossiness by causing light to scatter in various directions upon hitting the surface. This scattering of light creates a surface appearance that is notably less glossy and reflective.

Učinak matiranja posebno je poželjan u primjenama gdje se preferira prigušena estetika u odnosu na izgled visokog sjaja. Pronalazi značaj u različitim sektorima kao što je dizajn interijera, proizvodnja namještaja, automobilski premazi, i očuvanje umjetnina. Upotrebom sredstava za matiranje poput voskova, proizvođači mogu manipulirati načinom na koji se svjetlost odbija od površine za željeni mat izgled.

Vrste matira u premazima

Postizanje željenog učinka matiranja u bojama i premazima uključuje stratešku upotrebu različitih sirovina, i organski i anorganski, koji služe kao sredstva za matiranje. Ova sredstva igraju ključnu ulogu u mijenjanju karakteristika površine nanesenih premaza, što u konačnici rezultira željenim mat finišom.

Organsko sredstvo za matiranje

Organic matting wax agents are derived from materials such as polyethylene and polytetrafluoroethylene. These matting waxes are carefully selected for their ability to create the desired matte finish by modifying the way light interacts with the coating’s surface. When incorporated into paint or coating formulations, these wax-based matting agents introduce microscopic irregularities to the surface, which in turn disrupt the uniform reflection of light.

Inorganic Matting Agent

Inorganic matting agents, with silica being a prominent example, are minerals that are finely ground into particulate form and integrated into coatings. Silica matting agents are known for their effectiveness in achieving precise control over the degree of gloss reduction. Silica particles are designed to have controlled particle sizes, što proizvođačima omogućuje fino podešavanje željenog mat efekta u konačnom premazu.

Dodaci vosku za matiranje

Voskovi za matiranje također daju premazu otpornost na klizanje, što utječe na taktilni osjećaj površine. To može spriječiti probleme poput lijepljenja ili povlačenja kada predmeti dođu u dodir s premazanom površinom. Ugradnja voskova za matiranje može povećati otpornost premaza na oštećenje, tako da površina ostaje relativno neozlijeđena kada je izložena trenju ili manjim ogrebotinama.

Voskovi za matiranje također mogu pomoći u ublažavanju začepljenja, u kojem se dvije obojene površine lijepe zajedno kada su u izravnom kontaktu dulje vrijeme. Formiranjem barijere na površini, voskovi za matiranje doprinose smanjenoj sklonosti začepljenja. Nadalje, prisutnost voskova može povećati otpornost premaza na abraziju, što ga čini izdržljivijim i manje podložnim habanju.

Prednost a Vosak za matiranje iz Tripletchema

Prednosti korištenja voska za matiranje tvrtke Tripletchem nude značajne prednosti u raznim primjenama. Ovdje su neke od prednosti koje možete dobiti dodavanjem voska za matiranje u svoju formulaciju.

Lako se raspršuje

Kada vosak za matiranje pokazuje laku disperzibilnost, to znači glatkiju i dosljedniju ugradnju čestica voska u formulacije premaza. Ova karakteristika značajno pojednostavljuje proces proizvodnje. Formulatori i proizvođači mogu postići homogenu distribuciju voska za matiranje kroz materijal za premazivanje bez potrebe za pretjeranim miješanjem ili složenim postupcima miješanja. Ovo ne samo da štedi vrijeme i resurse, već i povećava ponovljivost željenog mat završetka u serijama.

Bolja suspenzija u formulacijama tekućeg premaza

Prednosti boljeg ponašanja ovjesa su važne. Pojednostavljuje proces formulacije. Proizvođači premaza mogu postići homogenu disperziju voska za matiranje bez potrebe za stalnim miješanjem ili kompliciranim tehnikama miješanja. To ne samo da usmjerava proizvodnju, već i povećava ponovljivost željenog mat završetka u različitim serijama.

Jednolika suspenzija čestica voska za matiranje izravno utječe na kvalitetu i izgled završne premazane površine. Kada su čestice voska ravnomjerno raspoređene, dosljedno se postiže mat efekt, što rezultira vizualno privlačnom i profesionalnom završnom obradom. Poor suspension behavior could lead to uneven coating thickness and patchy matte appearances.

No Effect on Drying Properties

Adding matting wax additive guarantees the consistency and reliability of the coating process. Manufacturers can confidently incorporate the matting wax into their formulations without the need for adjustments to accommodate changes in drying behavior. This not only saves time and resources but also enhances production efficiency.

Introduction of the matting wax won’t lead to unexpected complications during drying or curing. The absence of drying-related issues reduces the risk of defects, rework, or the need for additional finishing steps. Coatings that dry or cure unevenly could exhibit flaws, irregular textures, or diminished longevity. The Tripletchem matting wax’s ability to seamlessly integrate without interfering with drying properties results in a professionally finished surface with the intended matte effect.

High Matting Power with Small Amounts

Matting wax from Tripletchem offers high matting power with small quantities. It enables cost-effective production, grants control over aesthetics, and maintains formulation integrity. This attribute underscores the value of an efficient and effective matting wax that enhances both the visual appeal and practicality of the finished product, while also supporting the bottom line of manufacturers.

High Shear Stability

High shear stability and resistance to overgrind safeguard the performance of the matting wax throughout the manufacturing chain. This includes transportation, storage, and application processes, where the wax must maintain its effectiveness and integrity. Manufacturers can confidently integrate the matting wax into their coatings, assured that its properties won’t be altered by the mixing process. This stability ensures that each batch of coating maintains the intended matte finish consistently.

No Haze Formation

Haze formation are unintended appearance of a cloudy or milky visual effect on the surface of a coating, which can compromise the clarity and overall aesthetics of the finish. The incorporation of matting wax into the coating formulation does not lead to the creation of cloudy or hazy spots on the surface. Coatings that suffer from haze formation can appear less professional and visually pleasing, detracting from the desired matte effect. The Tripletchem matting wax’s ability to prevent haze ensures that the coating maintains a crisp and uniform appearance.

No Settling in the Coatings

The matting wax particles remain in a state that is easily dispersible and does not clump together into rigid, compact structures. This characteristic is crucial for maintaining the homogeneity and effectiveness of the coating, from the moment it’s prepared to its eventual application. It supports the usability and reliability of the coating. The prevention of hard sediment formation also contributes to the quality of the coated surface. When hard sediments form, they can lead to uneven distribution of the matting effect, resulting in inconsistent matte finishes.

How to Add Vosak za matiranje to Achieve Matting Finish

The gloss level is quantified as a percentage, with varying degrees from standard matt (oko 30% sjaj) to satin (oko 60% sjaj), sjaj (oko 70% sjaj), and high gloss (oko 80% sjaj). These values are approximate and typically allow for a variance of up to 5% due to inherent production variations.

As the particle size of the matting agents is reduced through the use of a pearl mill, the gloss level of the dispersion can actually increase. This might seem counterintuitive since the goal is to achieve a matte finish. The increased gloss occurs due to the reduction in particle size which can enhance the reflective properties of the dispersion.

To counteract this increase in gloss and achieve the desired matte finish, a higher dosage of matting agents is necessary. Because the smaller particles can contribute to higher gloss, a greater amount of matting agents needs to be added to achieve the intended level of matte appearance. This adjustment is a critical aspect of the formulation process, as it allows for precise control over the final gloss level of the coated surface.

PE wax is a high-quality wax with matting function. When used in paints and coatings, the matting effect is very detailed.