Organophilic Clay SDS
An organophilic clay SDS is the controlled safety document for a specific commercial organophilic clay product. It helps purchasing, EHS, warehouse, production, logistics, and emergency-response teams confirm the material identity and find the applicable hazard, handling, storage, exposure-control, first-aid, spill, transport, disposal, and regulatory information.
Quick Answer
Request the current organophilic clay SDS for the exact Camp-Shinning product or grade, destination country or region, and required language. Before approving the file, match its product identifier and supplier to the quotation or label, confirm the revision is current, and check that its scope covers the material being supplied. A generic bentonite sheet, a third-party SDS, or a document for another organoclay grade should not be used as a substitute.
Use This Five-Point Check Before Approving the SDS
| Approval check | What must match | Action if it does not match |
|---|---|---|
| 1. Product identity | The SDS product name or grade corresponds to the quotation, sample label, order, or container. | Stop the review and request the document for the exact supplied product. |
| 2. Supplier identity | Zhejiang Camp-Shinning New Material Co., Ltd. is identified as the supplier of the requested company document. | Do not treat a generic or third-party sheet as the Camp-Shinning SDS. |
| 3. Market and language | The document is suitable for the destination country or region and usable in the required language. | State the destination and language when requesting another version. |
| 4. Revision status | The issue or revision information is visible and the supplier confirms that the copy is current. | Provide the old file or revision reference and request the current controlled copy. |
| 5. Material scope | The SDS covers the supplied form and intended product. The current Camp-Shinning document states that nanoform is not covered. | Request technical and regulatory confirmation before proceeding with any material outside the stated scope. |
These checks prevent a common document-control failure: finding a sheet with a similar material name and assuming it applies to the shipment. For product identity and application context, review the organophilic clay overview, then return to the exact commercial grade shown on the transaction documents.
Verified Snapshot of the Current Camp-Shinning SDS
The supplied Camp-Shinning safety document identifies the product as an organophilic clay mixture and an organoclay rheological additive. It covers relevant industrial uses in coatings, paints, inks, sealants, lubricating grease, and oil drilling mud. The summary below is an orientation to the current source document, not a replacement for the complete SDS.
| Document item | Information stated in the supplied SDS | How to use it |
|---|---|---|
| Product form and appearance | Mixture; solid, light-cream, odourless powder. | Use Section 1 and Section 9 to support receiving identification; do not rely on appearance alone. |
| CLP classification | The mixture is not classified under the referenced CLP rules, and no CLP label elements are applicable. | Still follow all dust-control, hygiene, PPE, storage, and local workplace assessment requirements in the full SDS. |
| Handling | Provide good workstation ventilation, avoid dust formation and contact with skin or eyes, use recommended PPE, and wash after handling. | Use Sections 7 and 8 when establishing the receiving site’s work procedure. |
| Storage | Keep cool, protect from sunlight, keep the container tightly closed, and store in a well-ventilated place away from heat. | Compare the instructions with warehouse conditions before the material arrives. |
| Stability and compatibility | Stable and non-reactive under normal stated conditions; strong oxidizing agents are identified as incompatible. | Use Section 10 in the site’s storage-segregation and process review. |
| Transport | The supplied SDS states that the material is not regulated under the listed ADR, IMDG, IATA, ADN, and RID transport entries. | Logistics personnel must verify the current SDS and shipment conditions rather than relying on this webpage summary. |
| Scope limitation | Nanoform is not covered by the supplied SDS. | Do not extend the document to a nanoform or materially different formulation without written confirmation. |
Where to Find the Information You Need
| Decision or event | SDS sections to review first | Primary user |
|---|---|---|
| Confirm the delivered material | 1. Identification; 3. Composition; 9. Physical and chemical properties | Purchasing, receiving, quality, and EHS |
| Assess hazards and workplace controls | 2. Hazard identification; 7. Handling and storage; 8. Exposure controls/personal protection | EHS, production, maintenance, and supervisors |
| Prepare for exposure or an incident | 4. First aid; 5. Firefighting; 6. Accidental release | Trained employees and emergency responders |
| Plan storage and process compatibility | 7. Handling and storage; 9. Properties; 10. Stability and reactivity | Warehouse, process safety, and technical teams |
| Review health and environmental information | 11. Toxicological information; 12. Ecological information | EHS, product stewardship, and regulatory teams |
| Prepare waste and shipment controls | 13. Disposal; 14. Transport; 15. Regulatory information | Waste, logistics, import, and compliance teams |
| Confirm document currency | 16. Other information and the revision details shown in the controlled file | Document control, EHS, and supplier quality |
An SDS supplies safety information for risk assessment, but it does not replace a site-specific risk assessment. The receiving organization must consider its actual task, equipment, ventilation, exposure potential, other materials, local rules, training, and emergency arrangements.
Safe Handling and Emergency Orientation
The current company SDS emphasizes dust control and normal industrial hygiene. It directs users to ensure good ventilation, avoid dust formation, avoid contact with skin and eyes, wear recommended personal protective equipment, and avoid eating, drinking, or smoking while using the product.
- Inhalation: move the person to fresh air and keep them comfortable for breathing; seek medical advice if they feel unwell.
- Skin contact: wash with plenty of water and obtain advice if irritation occurs.
- Eye contact: rinse cautiously with water for several minutes and obtain attention if irritation persists.
- Spill response: ventilate the area, avoid dust formation, recover the powder mechanically, place it in an appropriate container, and keep it out of drains and water courses.
- Personal protection: the document identifies safety glasses, suitable protective clothing, protective gloves, and suitable respiratory equipment when ventilation is insufficient.
This shortened orientation is not an emergency instruction sheet. Train personnel from the complete current SDS and the site’s approved procedures before handling the product.
How to Request the Correct Organophilic Clay SDS
- Provide the Camp-Shinning product or grade shown on the quotation, sample label, order, or prior document.
- State the destination country or region and the language required by the receiving site.
- Describe the intended application, such as coatings, inks, sealants, lubricating grease, or oil drilling fluids.
- Include the company name, contact person, business email, and any supplier-approval reference.
- Attach the first page of an older SDS or provide its document number and revision date when requesting an update.
- Identify any related need for a TDS, COA, transport review, or customer compliance questionnaire.
If the grade has not been selected, send the formulation type, carrier or solvent system, application, and target function to the technical team first. Grade selection and SDS selection are connected, but they are not the same task.
SDS, TDS, and COA Must Remain Separate
| Document | Primary responsibility | Typical approval use |
|---|---|---|
| SDS | Safety, handling, exposure, emergency, storage, transport, disposal, and regulatory communication. | EHS review, workplace setup, logistics, and supplier approval. |
| TDS | Technical identity, typical product information, application direction, and processing guidance. | Product screening, formulation review, and technical comparison. |
| COA | Approved quality-control results for a defined batch or lot. | Incoming inspection, batch traceability, and release. |
For a grade-specific example of technical documentation, see the organoclay CP-250A technical data sheet for grease. That TDS route must not be used as a replacement for safety information.
Related Safety Document Routes
Procurement records may use several clay and additive terms. Follow the route that matches the supplied material instead of swapping documents based on similar wording:
- Use organoclay SDS when the commercial record uses the organoclay product-family term.
- Use rheology additive SDS when the inquiry is organized around the additive function and still requires exact product confirmation.
- Use bentonite clay SDS when the supplied material is identified as bentonite clay rather than an organically modified product.
- Use SDS for bentonite for the corresponding bentonite document search route.
- Use organoclay safety document support when resolving a repeated “SDS” query or older purchasing record.
Related pages help route the request; they do not authorize document substitution. The controlled SDS must always match the product being evaluated, received, stored, processed, or shipped.
Frequently Asked Questions
Request the Current Organophilic Clay SDS
Send the grade or product reference, destination market, required language, application, company details, and any previous document reference. Camp-Shinning can use these details to identify the applicable safety document and coordinate related TDS or COA requirements. Request organophilic clay SDS support.