Honi
Cerrar nuna ar cuadro nthoni.

Productos químicos organofílicos arcilla

Productos químicos utilizados ar fracking: "Fracturación hidráulica," nä'ä ir bo̲ni fracturación hidráulica, ge 'nar técnica utilizada pa extraer combustibles fósiles komongu ar gas xi ne petróleo ya profundidades. Ar bombeo mextha presión 'nar combinación agua-arena — producto químico ja ya estratos rocosos crea fisuras a través de ne nuya da xi recuperar ya hidrocarburos atrapados.

Productos químicos organofílicos arcilla

Arcilla organofílica pa lodo perforación petrolera

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Organoclay pa pintura a base de solvente

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Organoclay pa pintura a base de ar dehe

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Bentonita orgánica pa grasa

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Organoclay pa cosméticos

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Organoclay pa tintas

Lorem ipsum 'ñu̲ sit amet, Consectetur adipiscing elit. Sed auctor turpis eu arcu sagittis, ID Sagittis xi Suscipit.

Wax Emulsion for Drilling Fluid

Wax emulsion can not only be used in drilling mud, but also widely used in the fields of coatings and inks, paper and packaging, and plastics.

In the textile and leather industries, it is used as a wear-resistant agent, lubricante, and matting agent, while the use of wax emulsion in leather can give it a better feel and can prevent stains and protect it.

It can be said that the application of wax emulsion is extremely wide.

In addition to the applications we mentioned above, it can also be applied to the ceramic industry, concrete maintenance and sealing industry, as well as adhesives, sealants, and cosmetics.

Wax Emulsion for Drilling Mud

Wax Emulsion

Wax emulsion is used in drilling mud. The first role it plays is to protect the stability of the well wall, and to play a role in lubrication and reducing resistance. Ma xkagentho ar pa, it can effectively reduce its filtration loss and protect the reservoir.

The reduction of filtration loss is mainly because drilling fluid is more likely to lose drilling fluid, which affects the stability of the well body.

Ir, we use wax emulsion to seal the gaps in the formation and form a more resilient membrane, so that the pressure membrane of the well wall is not easy to be broken.

Productos químicos utilizados ar fracking

ORGANOCLAY:

Our Five-Star Treatment Media

Your first choice for removing organic contaminants from water or sediment, the ORGANOCLAY product range provides formulations to meet almost any adsorption application.

Used and trusted worldwide, it’s proven to work efficiently and effectively.

A little goes a long wayand reduces costs

ORGANOCLAY’s substantial adsorption capacity not only reduces necessary cap thickness compared to a conventional sand cap but can also extend cap life—in some circumstances, for years—and reduce overall costs.

Because ORGANOCLAY can be used as a pre-treatment to Granular Activated Carbon (GAC), ORGANOCLAY can increase overall efficiency by preventing surface pores in GAC from blinding.

The ORGANOCLAY Product Range

Powerfully adsorbant ORGANOCLAY is available in multiple formulations to best mitigate water and sediment contamination in a variety of specific conditions:

ORGANOCLAY: Our coarsest grain media, ORGANOCLAY is a larger and denser version of ORGANOCLAY CP-200 to aid in settling through the water column. When used for sediment capping, ORGANOCLAY can be placed hydraulically or mechanically.

Aplicaciones:

Sediment Capping

Organoclay_Sample_Shot

ORGANOCLAY : A proprietary granular filtration media that reliably adsorbs oils and similar organics from water. It is a brown and black mixture of 30% active ORGANOCLAY and 70% anthracite filter media, which allows for maximum utilization of the large sorption capacity of ORGANOCLAY without excessive pressure build-up in the column. When used as an in-series filtration media prior to an activated carbon vessel, ORGANOCLAY extends the life and adsorbency of the activated carbon by removing larger molecular organics before they reach it. It also lowers the overall operating cost relative to using activated carbon alone. ORGANOCLAY can also be used in standalone mode to treat oil-contaminated water and stream condensates.

Aplicaciones:

Groundwater Pump-and-Treat

Sediment Dewatering Treatment

Organoclay

ORGANOCLAY: In addition to adsorbing non-aqueous phase liquids and dissolved low-solubility organics, specially-formulated, sulfur-impregnated ORGANOCLAY sequesters mercury (Hg0, Hg+1 and Hg+2) and arsenic (As+5) from water. Ideal for groundwater pump-and-treat or sediment dewatering treatment, ORGANOCLAY can also be used in soil or sediment solidification/stabilization or as an additive to Portland Cement.

Aplicaciones:

Groundwater pump-and-treat

Sediment dewatering treatment

Solidification/stabilization

ORGANOCLAY CP-199: Our second finest grain media, ORGANOCLAY CP-199 features high adsorption capacity of oils, Grasas, and other NAPL. When used as an in-series filtration media prior to an activated carbon vessel, ORGANOCLAY CP-199 extends the life and adsorbency of the activated carbon by removing larger molecular organics that can cause fouling. ORGANOCLAY CP-199 also works as a standalone treatment media to treat oil-contaminated water and stream condensates.

Aplicaciones:

Organophilic Filtration Media

Bulk Sediment Capping

Solidification/Stabilization additive

Organoclay_Sample_Shot

ORGANOCLAY CP-200: Our second coarsest grain media, ORGANOCLAY CP-200’s particle size aids in settling through the water column when placing a bulk active in-situ sediment cap. ORGANOCLAY CP-200 is also your best match for intermixing with coarse inert soil for use of a Permeable Reactive Barrier (PRB).

Aplicaciones:

Bulk Sediment Capping

Permeable Reactive Barrier (PRB)

Organoclay_Sample_Shot

ORGANOCLAY 199: Our finest-grain media, ORGANOCLAY 199 features medium adsorption of oils, Grasas, and helps stabilize organics for increased solidification of treated soils and sediment. ORGANOCLAY 199 is for use in soil or sediment solidification/stabilization or as an additive to Portland Cement.

Aplicaciones:

In Situ Solidification

How it does it

The ORGANOCLAY product line is a range of proprietary adsorption media that is highly effective in removing oils, greases and other high molecular weight, low solubility organic compounds from aqueous streams. ORGANOCLAY products are specialty sorbents, altered to an organophilic state making them attractive to organic molecules.

Camp ShinningPioneer and leader in environmental remediation

Camp Shinning is the leader and pioneer in cutting-edge environmental remediation solutions. Around the globe, our innovative teams of clay mineralogists, chemists, and polymer scientists transform ordinary minerals into extraordinary technology to solve day-to-day problems worldwide.

Organoclay is an organically modified phyllosilicate, derived from a naturally occurring clay mineral. By exchanging the original interlayer cations for organocations (typically quaternary alkylammonium ions) an organophilic surface is generated, consisting of covalently linked organic moieties. The lamellar structure remains analogous to the parent phyllosilicate.

Separation of the layers due to ion exchange, from the initial interlayer spacing of as little as 3 Å in the case of Na+ cations to the distances in the range of 10–40 Å as well as the change of chemical character of the clay surface, allows the in-situ polymerization or mixing with certain polymers to obtain what is known as nanocomposite. When ordered aluminosilicate sheets are lying parallel to each other, separated with polymer chains of certain type, the system is classified as intercalated nanocomposite. If separation of the layers is so significant, that they are no longer lying opposite to one another, but randomly ordered, then one get the exfoliated nanocomposite.

Aplicaciones

Owing to its large surface area together with hydrophobic chains emerging from the clay surface, organoclay can be used to remove oil from water. It is also applied as a component in paint formulations or as a viscosifier for oil-based drilling fluids.

It can be used in polymer chemistry as a nucleating agent.

¿Temu̲ ar Organoclay??

How Organoclay is Used and the Benefits

Organoclay is a naturally occurring material that is commonly used in water treatment. Organoclays are well known for their high removal rate of oils and other hydrophobic compounds in water. The media is a naturally occurring mineral (commonly zeolite, bentonite clay, or a smectite mineral) which is chemically alternated to create a unique surface on the mineral. Camp Shinning’s organoclay is a zeolite based organoclay which has does not swell upon exposure to water.

How does Organoclay Work?

Camp Shinning alters zeolite with a surfactant bilayer that enhances the media’s ability to remove pollutants. The surfactant bilayer is created when a quaternary amine or surfactants is added to the mineral to modify the surface commonly referred to as surface-modified-zeolites (SMZ). By modifying the surface, we create a strong affinity with either cations (positively charged ions, i.e. dissolved metals) or anions (negatively charged ions, i.e. phosphate, nitrate). The bilayer that contains hydrophobic chains will capture non-polar organics such as benzene.

Illustration of How Organoclay Works

How is Organoclay Used?

Organoclays are used in various industries including remediation, water treatment, soil treatment, in polymer chemistry, in paints as a thickening agent, grasa, Tintas, oil drilling fluids, rheological products, cosméticos, and many more commercial and industrial applications.

What are the Benefits of Using Organoclay?

Versatile installation — Load the media in standalone units, post-treatment, or pre-treatment units. To learn more about these systems on our Water Filtration Systems Page.

Cost Savings — Organoclay is an economical alternative to other treatment technologies such as resins or Granular Activated Carbon (GAC).

Increase Efficiency — Organoclays will decrease the loading on other treatment systems and increase the life of capital equipment.

Storage — Organoclays have a long shelf life and require dry ambient environments.

Handling — Organoclays are safe and easy to use.

How is Organoclay Used in Water Treatment?

CP-200 Liquid Phase, Pure Organoclay

Organoclays are used in industrial and commercial water treatment such as:

Condensate Treatment Systems: Condensate treatment is part of every power plant, refinery, chemical manufacturer, and any facility that uses stream. Típicamente, the condensate is recycled back into the boiler feed water where it is routed through boiler tubes for continued boiler use.

Recycling condensate is a common practice which decreases the amount of water disposal but can be costly if not designed correctly. By not treating the condensate that goes back into your boiler feed water you are introducing high concentrations of pollutants that came off leaking pumps, valves, and piping to your boiler tubes. When these pollutants (hydrocarbons and minerals) are introduced to the boiler tubes they will deposit on the surface which will reduce the heat transfer and overall reducing the boiler efficiency.

Camp Shinning’s works with condensate treatment manufacturers and users on providing a specialty blend of filter material for treating the pollutants that are commonly found in condensate. The condensate treatment blend of filter media uses organoclay and activated carbon to trap the contaminates in its’ pore structure.

Process Water Reuse Systems: Leaking pipes, valves, vessels, or inefficient processes can leave process water tainted with low concentrations of pollutants. These pollutants over time can lead to hazardous water that needs to be hauled off site for treatment. A common use of organoclay is to treat process water onsite in a vessel to reuse the water instead of discharge it or accumulate it and haul it off-site as hazardous waste. Tainted water can lead to downtime of capital equipment and hefty bills for hazardous waste disposal. Examples of process water treatment systems might include the wash water that is used in a metal plating facility, or batch water that has low concentrations of acrylic paint thinner. Simply installing a vessel of organoclay in a process water loop can significantly reduce planned and unplanned downtime.

Organoclays are used in remediation projects such as:

Groundwater Treatment: Pump-and-Treat Systems are typically implemented when groundwater is contaminated. For pump-and-treat systems, the water is typically pumped out of the ground into a large vessel. The large vessel or series of vessels is filled with a filter media (i.e. granular activated carbon, organoclay, resin) that removes any pollutants of concern such as heavy metals or oil. The water is then put back into the ground. Pump-and-treat are cost-effective designs for treating water if you select the most appropriate filter media to target your pollutants.

Sediment Capping: Capping, also known as permeable reactive barrier , is an in-situ remediation technology that typically follows dredging operations. Organoclay is used in sediment capping due to its’ ability to isolate contaminated sediment from a surrounding aquafer or aquatic system. It is a cost-effective material for capping as it has strong affinity for removing high molecular weight polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and heavy metals.

Stormwater Treatment: Organoclay is used to improve water quality in stormwater runoff. Típicamente, pollutants found in stormwater are monitored by state regulators to ensure we have clean lakes, Däthe, oceans and wetlands

Learn more about how Organoclay is used in water treatment.

Rheological Additive for Solvent Base System

CP-200 is an organic derivative of bentonite clay act as Rheological additive in low to high polarity systems. Such as Ketones, Glycol, Alcohol, Esters and Ethers, includes Polar System with some Aromatic Solvents.

Propiedades & Markets

Paints & Recubrimientos : A small addition of ORGANOCLAY can greatly enhance the rheological properties of the paint system. These properties prevent pigment settling and sagging on vertical surface to ensure the proper thickness of the coating is applied. They also ensure good leveling for the removal of brush marks.

Storage stability is guaranteed even with high temperatures. ORGANOCLAY confer water resistance and structure reinforcement with no adverse effect on adhesion and solvent relese. Gloss is minimally affected due to the low levels of addition. ALL ORGANOCLAY are used widely in a vast range of solvent based paint systems

Architectural Paints : Undercoats, Primers, Semi-Gloss, Gloss and Wood Stains

Industrial Coatings : Air Drying, Stoving Enamels, Epoxies, Esters, Urethanes, Vinyls, Acrylics, Anti-Corrosive, Automotive, Bitumionous, Coil, Road Marking, Underbody Car Coatings, Nitro Cellulose and Chlorinated Rubber.

Printing Inks : With the correct ORGANOCLAY, is possible to adjust the consistency of printing inks to the desired values, avoiding pigment sedimentation, providing good color distribution obtaining desired film thickness, reduction in misting, control of track, water pick up and dot gain control. ORGANOCLAY are used in much letterpress, lithographic and offset ink.

Lubricating Greases : Thickening lubricating oils with ORGANOCLAY can produce specialty high temperature resistant lubricating greases. ORGANOCLAY also gives good working stability and water resistance to the greases. Such greases are typically used for lubrication in foundries, mills and on high speed conveyors. Other greases can be manufactured for other industries such as agriculture, aviation, automotive and mining.

Cosmetics : The performance of cosmetics is enhanced by the use of ORGANOCLAY and they allow good colour retention and coverage for nail lacquers, lipsticks and eye shadows. They have been tested to be non-irritant for both skin and eye contact.

Food Contact Applications : ORGANOCLAY are used as thixotropic agents in coatings that come into contact with food. They are also used as fillers in plastic food containers. They are acceptable under current EEC legislation on food contact additives.

Fluidos perforación : ORGANOCLAY are used extensively in drilling fluids throughout the world. They are used to suspend the heavy sealing agents, normally barytes and carry the cuttings back to the surface. They also play an important part in lubricating the drill. ORGANOCLAY can also be used as fracfluids, where the gelling ability of them is used to seal rock fractures in the bore hole.

Nanofiller for Plastic : Highly purified organoclays because of their particle size and chemical structure have the unique ability to be able to function in a wide range of monomers and polymers. The resulting properties of polymers, compounded with these unique organoclays include :

  1. Increased Modular Strength without Sacrificing Impact Resistance
  2. Improved Gas Barrier Properties
  3. Increased Solvent and Heat Resistance
  4. Improved Fire Retarding Properties

The combination of these improved properties, convenient processing and relative low costs, makes nano composites a tremendous commercial opportunity as they are superior alternatives to the current fillers used in polymer systems.

Hectorite and Bentonite based organoclay grades

Optimum activation of organoclays by ideal organoclay for highest effectivity

Correct activation for highest efficiency

❖ Optimum shear applied for proper delamination

❖ Correct use of polar activator for conventional grades

❖ Right order of addition for best processing result

organoclays can be optimized by improved process parameters including a review of the process temperature.

'Ñotho ar embargo, temperature control during organoclay dispersion in solvent based systems is not as important as with e.g.

organic thixotropes.

Various methods used in manufacturing formulations and procedures sometimes suffer in efficiency when order of addition and mixing conditions are less than optimum.Further, the effects of solvent resin temperature on process development and final results will be discussed.

organoclay materials are based on either

bentonite or Hectorite, both minerals from the smectite group. They consist of microfine platelet stacks that, due to their mineralogical structure, expand in water in their natural form. In order to make them compatible with non-aqueous media such as organic solvents, however, it is necessary to modify the surface of their silicate plates with quaternary ammonium compounds.

The choice of this modification and processing conditions also plays an important role in the practical applicability and performance capabilities of the finished end systems. The resulting organoclay will be dried and milled to achieve a powdered material.

To be most rheologically effective, the size of the individual platelets and the total combined edge length following their successful activation is decisive.

the Hectorite platelets are significantly smaller than the bentonite ones, the resulting edge length per gram of silicate in the Hectorite is much larger.

This makes Hectorite additives able to build up a much denser and more rheologically effective network. In order to be activated, organoclays must first be exposed to high shear forces over a defined swelling period.

¿Ter 'me'ä ar arcilla organofílica??

Organophilic clay is a type of clay that has been chemically modified to be compatible with organic solvents and non-aqueous systems. It’s a viscosifier and gelling agent used in various applications, including drilling fluids, Pinturas, and cosmetics.

[Fluidos perforación]

Clay minerals whose surfaces have been coated with a chemical to make them oil-dispersible. Bentonite and hectorite (plate-like clays) and attapulgite and sepiolite (rod-shaped clays) are treated with oil-wetting agents during manufacturing and are used as oil-mud additives. Quaternary fatty-acid amine is applied to the clay. Amine may be applied to dry clay during grinding or it can be applied to clay dispersed in water. The latter process is much more expensive, requiring filtering, drying and other manufacturing steps. Organophilic bentonite and hectorite, “bentones,” are used in oil muds to build rheology for cuttings lifting and solids suspension. They also contribute to low-permeability filter cake. Organophilic attapulgite and sepiolite are used in oil muds strictly to build gel structure, which may not be long lasting due to shear degradation as the mud is pumped through the bit.

CP-2 organophilic clay is a viscosifier and gelling agent used in VERSA oil-based and NOVA synthetic-based systems. This amine-treated bentonite is used to increase carrying capacity and suspension properties, providing support for weighting agents and improved cuttings removal. CP-2 viscosifier also aids in filtercake formation and filtration control.

Aplicaciones

CP-2 viscosifier is proven effective in drilling, coring, workover and completion fluids. The product is also effective in specialty applications such as casing packs, packer fluids and spotting fluids. Good agitation and sufficient shear are required to develop viscosity when using CP-2 viscosifier to build fresh mud.

Typical concentrations range from 2 Pa 10 lbm/bbl [5.7 Pa 28.5 kg/m3] for most drilling fluid applications, depending on the base fluid and system requirements. Mineral oils generally require higher concentrations than diesel oils. CP-2 viscosifier will not fully yield by the shear and temperature exposure in a mixing plant or mud pit. Care should be taken not to overtreat with CP-2 viscosifier until the fluid has actually circulated through the well. For system maintenance, CP-2 viscosifier should be added as needed to maintain the flow properties and gel strengths in the desired ranges. Specialty applications such as packer fluids and casing packs typically use concentrations in the 10 Pa 15 lbm/ bbl [28.5 Pa 43 kg/m3] range.

Ventajas

Provides gel structure and viscosity for the suspension of weight materials

Increases viscosity for improved hole-cleaning capacity

Improves filter-cake quality and filtration characteristics

Effective gelling agent in casing packs and packer fluids

Toxicity and handling

Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the safety data sheet.

Packaging and storage

CP-2 viscosifier is packaged in 50-lb [22.7-kg] multiwall paper sacks. Store in a dry, well-ventilated area. Keep container closed. Store away from incompatibles. Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping, and stacking.

So far I’ve had no luck finding organophilic clays like CP series in China apart from one drilling company that wanted upwards of $200 for a 25Kg bag of oil drilling product. I did a trawl of online patents to see how hard the stuff is to make.

Both these chemicals are used in fabric softeners and are available as industrial chemicals. Buying the bentonite and the surfactants above might be a bit more common compared to bentone in countries that don’t drill for oil much.

Is it going to be easy to buy these industrial surfactants than Bentone?, probably is if you can find an industrial chemical supplier who’ll sell you less than a 200 litre drum.

Arcilla organofílica

Organophilic clay is a wet process improved viscosifier and gelling additive, derived from a naturally occurring clay mineral.

Feature

Organophilic clay has good performance efficiency in diesel, mineral oil and synthetic Oil; It can effectively suspends weighting materials and other solids, maintains suspension over a wide temperature range.

Nt'ot'e

Organophilic clay is a self-activating gallant offering rapid yield development, Altas resistencias gel, ne aumento ar dätä nt'ot'e.

Productos químicos organofílicos ar arcilla utilizados ar fracking

 

¿Ter 'me'ä ar fracking??

Ar sector energético xi xi revolucionado ir nge ar fracking, nä'ä xi 'yo̲t'e accesibles dätä cantidades ar recursos nu'bu̲ inalcanzables. 'Ñotho ar embargo, Ya preocupaciones dige ár impacto jar nä'ä xi convertido ja 'nar tema polémico jar últimos ya je̲ya.

Dependiendo ar pozo ne ar xe̲ni, Mezcla exacta productos químicos utilizados fluido fracking to da diferente. Ya productos químicos ya fluidos fracking podrían causar envenenamiento ya dehe subterráneas, contaminación atmosférica, ne ar liberación sustancias peligrosas jar ar nt'uni mbo jar ximha̲i circundante. 'Ra ya hñäki ambientales xi xi causados errores wa ja ya nt'ot'e incorrecta ar 'ye̲ ya productos químicos Nxoge ar proceso excavación.

¿Temu̲ productos químicos ar utilizan ja ar fracking??

Ar fracturación hidráulica gi japu̲'be̲fi fluido fracturación hidráulica. Ar dehe, Apuntalantes, ne ya productos químicos nzäm'bu̲ 'bu̲i nuna ar fluido. Empresa perforación, Formación geológica, ne ar legislación municipal determinan ar composición ar fluido fracking. Ar fracturación ar hidráulica bí basa ja ar arcilla organofílica da suspender ya componentes pesaje ne ma'ra minerales sólidos ja ar roca, ha̲i, ne arena. Arcilla organofílica, 'Nar ingrediente crucial ar fracking, ar suspende xi hño.

Ya propiedades fractura ar arcilla organofílica ya muchas. Pe interactuar rápidamente ko ko ya fluidos, ya ke ar dispersa ne ar autoactiva. Gasóleo, Asete mineral hñets'i'i ñu̲ni, asete vegetal modificado, ne ya composiciones fluidos base sintética ar benefician ar 'me̲hna. Ar mfeni ar arcilla organofílica pa suspender partículas sólidas jar fluido fracturación hidráulica dá thogi nt'ot'e xi hño. Ar arcilla mantiene ya agentes apuntalamiento, arena, ne ma'ra ya sólidos procedentes ar sedimentación wa ya aglomeración.

 

¿Tengu ya productos químicos ja jar fluido fracking??

Ar fracturación hidráulica gi japu̲'be̲fi productos químicos fracturación hidráulica. Kasu̲ nga̲tho ya 'nandi, Nuna ar fluido xí dehe, arena wa ma'ra ya rellenos, ne ya 'na'ño productos químicos. Ya ingredientes exactos ya productos químicos utilizados ar fracking xi mpa̲ti ir nge ya komongu ar formación rocosa jar zot'i ar perfora, Ya gustos ar negocio ar perforación, ne ya leyes locales.

Ar arcilla organofílica ge 'nar producto químico útil ne da agrega ya proceso fracturación hidráulica pa mejorar ar nt'ot'e da pesa materiales ne ma'ra minerales sólidos ja ar roca, suciedad, ne ar arena bí mantiene jar suspensión. Ar arcilla organofílica ge 'nar xe̲ni clave ar fracking, ne funciona xi hño komongu agente estabilizador.

Ar hei ar extender ne ar autoactiva, nä'ä ir bo̲ni ke tsa̲ da interactuar ko ko ya fluidos ya nt'ot'e ngut'a ne xi hño. Nuna ar rasgo ar hontho útil jar fórmulas da usan gasolina, Asete mineral hñets'i'i ár ñu̲ni, Asete vegetal modificado, wa fluidos base sintética.

Ar arcilla organofílica funciona xi hño ja ar fracturación hidráulica ngetho mantiene ya objetos sólidos suspendidos fluido fractura. Ar arcilla evita ne gi piezas ar fijen wa da peguen, nä'ä ya apuntalantes, arena, ne ma'ra ya materiales sólidos ar distribuyen uniformemente ya nga̲tho ar fluido.

 

¿Yogo'ä ar utilizan productos químicos ja ar fracking??

Ar agregan productos químicos jar ár njäts'i ya fracking pa ndi funcione hño ne 'yot'e ne proceso ruptura da mäs efectivo. Nuya productos químicos ayudan da ne da zeti grietas ja ya capas roca, nä'ä permite ar extracción hidrocarburos.

Agentes gelificantes, como arcillas organófilas u organófilas, ya ma'na ar klase ar producto químico utilizado ja ar fracking pa gi fa̲xki mover ya agentes apuntalamiento nu'bu ya grietas. Gi sustancias ar fabrican pa gi ne espesor fluido fracking da mäs espeso, o̲t'e nä'ä mäs ár ngo̲ 'nar gel ne mäs capaz sostener ne mover ya agentes apoyo.

Nu'bu̲ ar añaden agentes gelificantes ma fluido fracking, Mejoran jár mfeni pa da mover ne esparcir ya agentes apuntalamiento, ngu perlas arena wa ya arcilla, ja ya grietas nu'u̲ xi hokya jar formas ya rocosas. Ar dätä viscosidad ar fluido evita ke ya apuntalantes ar asienten me̲ na ngutha.

 

Fracturación hidráulica pa petróleo ne gas: Impactos ar Ciclo ar ar dehe Fracturación Hidráulica dige ya Recursos Hídricos

Ar fracking xi mejorado ar producción energía, pe ar tsa̲ da dañar ar dehe potable. Nu'bya compuestos peligrosos, Ar ciclo ar dehe fracturación hidráulica to da ñut'i nu'u ar hño ne disponibilidad ar dehe potable.

Ar fracturación hidráulica requiere ndunthe ya dehe. Proviene ar embalses ar dehe dulce adyacentes, Däthe, lagos, wa acuíferos. Xí extracción masiva ar dehe tsa̲ da agotar ya suministros locales ar dehe, afectando ya residentes ne ya ecosistemas adyacentes’ ar dehe potable.

Ar dehe, Apuntalantes, ne ya productos químicos componen ya productos químicos ar fracking. Ar fluido ar principalmente ar dehe ne arena, Pe ya adiciones químicas ya preocupantes. Nuya aditivos xi proporcionar riesgos pa ar nt'uni mbo jar ximha̲i ne ar nzaki. 'Ra ya productos químicos utilizados fluido fracking xi contaminar ya 'mui mbo ar dehe locales, Ho̲ntho nu'u̲ ya me̲he̲ ar dehe potable, Nu'bu̲ ar derrama wa da manipula incorrectamente.

Ar flujo ar retorno ne ar dehe producida ar crean 'mefa xta ar fracking. Sales, metales pesados, Xe̲ni radiactivos naturales, ne ma'ra contaminantes ya pa ngatho jar nuna ar efluente. Gi dehe residuales contienen productos químicos fracking ne xi contaminar ar dehe potable nu'bu̲ bí procesan ar adecuadamente.

Temu̲ da hñäki ya contaminantes jar dehe ko organoarcillas

'Mefa xta emulsionar mecánicamente ar asete, Fusión bojä ya gotas asete reduce concentración asete ne grasa ma niveles hindi detectables, Gi tsa̲ ar reciclaje ar dehe residuales. Pa nä'ä di 'bui ar mahyoni ga pädi ya procesos ar post-pulido, Ho̲ntho nu'u̲ ya arcillas organológicas. Ya arcillas organoclays eliminan ar asete ne ar grasa ar dehe yoto ya 'nandi mäs xi hño da thehñä activado.

Gi arcillas orgánicas modificadas atraen ne atrapan ya moléculas asete ne grasa. Ya arcillas organoclays agilizan jar eliminación ne purifican ar dehe. 'Me̲hna mejora yá sistemas ya nt'ot'e ya dehe residuales. Mejoran ya ar dehe ja ar separar ar asete ne ar grasa. Ár excelente mfeni ya adsorción ne ya dätä nt'ot'e ahorran bojä ja ar disminuir jar thehñä activado wa ma'ra productos químicos ár nt'ot'e. Ya arcillas organoclays jar nt'ot'e ar dehe residuales necesitan 'nar cuidadosa ntheki ar dosis, Duración ar contacto, ne caudales. Ar optimización ne ar supervisión garantizan 'nar rendimiento ne 'nar rentabilidad óptimos.

 

Productos químicos organócrales utilizados ar fracking

Ar arcilla organofílica ayuda ja ya fluidos fracturación hidráulica suspender ne dispersar ya componentes pesaje ne ma'ra minerales sólidos ja ar roca, ha̲i, ne arena. Ar arcilla organofílica mantiene ya cualidades suspensión jar fracturación hidráulica komongu adición química..

Propiedades

Ya productos químicos organoclay gi 'bu̲hu̲ hechos ar ne pe̲ts'i cualidades únicas. Kasu̲ nga̲tho ya 'nandi, Nuya productos químicos ar elaboran a partir de arcilla bentonita modificada biológicamente. 'Me̲hna ya bi pa̲ti ja 'nar xeni na útil ne flexible ya 'befi ja ya fracturación hidráulica.

Composición

Ya productos químicos organocopiosos ya da su mayoría arcilla bentonita modificada orgánicamente. Ya aplicaciones fracking ar benefician ar nuna ar proceso alteración ar arcilla. Ar nyokwi nthoki orgánica mejora ar adsorción ne ar dispersión ar arcilla.

Apariencia

Ir 'me̲t'o general, o 'mu̲i dets'e polvo finamente dividido. Varían jar njät'i ndezu̲ ar blanco roto asta ar tostado, ne ar nt'uni proceso composición ne nyokwi nthoki.

Contenido humedad

Kasu̲ nga̲tho ya 'nandi, Ya materiales organócrales utilizados komongu productos químicos fluidos ar fracking pe̲ts'i 'nar za̲ ár nthe̲ humedad ar 3.5% wa menos. Yá 'bede ya humedad ja ya productos químicos organócrales ge 'nar factor mahyoni da ts'oni ár funcionamiento.

Gravedad específica

Acerca ar 1.7 ar gravedad específica ya productos químicos da componen ar organoclay. Ar gravedad específica ge 'nar dets'e comparar ar densidad 'naxtu̲i ko ar densidad ar dehe. Gravedad específica ya materiales organocraicos gi 'ñudi Tengu pesan ne Temu̲ ngut'ä densos ya. 'Me̲hna to gi da 'BATS'I jäts'i Tengu zu̲di ne honja ar comportan jar fluido fracking.

Densidad aparente

Pe̲ts'i 'nar densidad aparente ja 0.40 y 0.60 g yá cm3. Densidad aparente ya materiales organocósicos ga indica Temu̲ ngut'ä xi hño da xi empaquetar ne honja tsa manipular ar.

Ventajas

Ya productos químicos organocraicos utilizados ar fracking pe̲ts'i xingu njapu'befi da o̲t'e ya xi populares jar ximha̲i ya negocios. Nar dätä hño 'nar beneficio ge da xi zeti pesaje materiales ne ma'ra ya objetos suspensión jar corriente fracking. 'Me̲hna asegura ne nuya materiales ar distribuyan ar ar mäs xi hño bí tsa̲ Nxoge ar proceso fracturación. 'Me̲hna conduce 'nar mäs xi hño formación grietas ne 'nar mäs xi hño extracción asete.

Ya productos químicos organócracos 'nehe mantienen jár mfeni ya permanecer njäts'i jar nthegi xi hño. 'nar rango ar temperaturas, nä'ä ya xí útiles ko xingu ya hñäki Bu̲i. Gi ventaja ar ke hingi necesitan ningún activador químico adicional. 'Me̲hna thogi ne proceso fracking da mäs hei ne xí ne ar mezcla fluidos da nja'bu̲ complicada.

Ya venenos organoclay 'nehe ya fáciles ar esparcir, nä'ä pe̲ts'i yá impactos rápidamente. Ya productos químicos organoclay ge 'nar hño opción pa ar fracking ngetho pe̲ts'i nuya njapu'befi. 'Me̲hna asegura ke ya sólidos permanezcan jar suspensión Nxoge ngatho ar proceso.

Nt'ot'e

Arcilla organófila Zhejiang Camp — Shinning CP — 160, 'Bui aplicaciones cruciales komongu aditivos pa fluidos fractura jar industria ar fracking. CP — 160 ge 'nar agente autoactivador da exhibe 'nar rápido nte rendimiento, Altas resistencias gel, ne aumento ar dätä nt'ot'e.

  • Viscosificación fluidos perforación
  • Ga̲tho ya fluidos perforación a base de petróleo
  • Fluidos emulsión inversa
  • Fluidos reacondicionamiento
  • Fluidos fractura
  • Gasóleos
  • Aceites Minerales
  • Asete sintético
  • Alfa Olefinas lineales ne isomerizadas

 

Ntsuni

Hojas datos ntsuni ya materiales (MSDS (hoja ar datos fábrica)) contienen nga̲tho ar ungumfädi Ntsuni da Zhejiang Camp — Shinning t'ot'e pa xi hño da ja da yá productos 'bu̲hu̲ seguros. Gi hojas pe̲ts'i ungumfädi específica dige ya posibles peligros yá materiales ya ne instrucciones dige Honja 'ye̲ ya, de̲nda, ne deshacer gi nu'u̲ dets'e segura.

 

Paquete

Organoclay ar Zhejiang Camp — Shinning ar tsa̲ da empacar ja 'nar bolsa ar he̲'mi Kraft ko 'nar capa PE, ja 'nar bolsa ar he̲'mi multicapa, wa 'nar bí nu'u diseñada ho̲ntho pa nä'ä di 'bui. Ar límite ar be̲xu normal pa ya bolsas 25 kg, o 22.68 Lb., pe ar xi mpa̲ti pa da ajusten ja yá ndu. Ya bolsas ar he̲'mi kraft ko revestimientos PE añaden 'nar capa adicional mfa̲ts'i ar humedad, nä'ä evita ke ya productos ar dañen. Ya bolsas ar he̲'mi multicapa ya resistentes ne ya duraderas pa ndi tsa da mover ar ne almacenar ar ar nt'ot'e segura.

Almacenamiento

Zhejiang Camp — Shinning CP — 160 da zeti jar lugar 'nar seco, Habitación xi hño ventilada. Zeti nä'ä en un área con una temperatura entre 0°C y 30°C. 'Me̲hna asegura ne ar orgaoclay bí mantenga hingi mpa̲ti ne intacta. Ar plazo garantía hño pa ar arcilla organofílica CP — 160 ar Zhejiang Camp — Shinning 24 Ya zänä, nä'ä demuestra da durará xingu ya pa nu'bu̲ mantiene ar bí correcta.

Productos químicos organofílicos arcilla

Trabajemos ga̲tho

Ga japi ar jar contacto ko ngekagihe nu'bya xkagentho ne reciba hño nthoki 'nar gratuita.

Desplazar ga ntsuni mañä